HOME | ABOUT US | CERTIFICATIONS | CATALOG | CONTACT US | REQUEST QUOTE
 
 
  Translate This Page 
 
Featured
 
 
 
 

35 Year Master Flash® NEW ICC LISTED FLASHING”

IF YOUR FLASHING DOESN’T HAVE A 35 YEAR WARRANTY,
NEITHER DOES YOUR ROOF!

  • AVAILABLE IN 9 SIZES
  • MADE OF EPDM, THIS FLASHING IS DESIGNED FOR MAXIMUM RESISTANCE TO ALL WEATHER CONDITIONS.
  • THE BASE IS DESIGNED TO FIT VIRTUALLY ALL PANEL CONFIGURATIONS AND ROOF PITCHES REGARDLESS
    OF PIPE LOCATION.
  • ON SITE CUSTOMIZATION.
  • OZONE AND UV PROTECTED.
  • DESIGNED FOR 1/4” TO 13” DIAMETER PIPES.
  • PIPE DIAMETERS CAN BE SEEN CLEARLY FOR PROPER PIPE FITTING.
  • FLEXIBILITY ABSORBS VIBRATION AND PIPE MOVEMENT.


Aztec Washer's ICC-ES is the United States’ leading source of technical information on building products and building technology for code compliance. ICC-ES performs technical evaluations of building products, components, methods and materials. The evaluation process culminates with the issuance of reports on compliance with the major U.S. building codes, which are available at www.icc-es.org.

ICC-ES is a subsidiary of the International Code Council, a membership association dedicated to building safety and fire prevention that develops the codes used to construct residential and commercial buildings, including homes and schools. Most U.S. cities, counties and states that adopt codes choose the International Codes developed by the International Code Council.

Available in 9 Sizes
EPDM 500
ADVANCED OZONE RESISTANCE tested to... 70 hour @ 500 pphm
HIGH TEMPERATURE RESISTANCE
tested to intermittent • +135ºC (+275ºF)
continuous • +100ºC (+212ºF)
LOW TEMPERATURE RESISTANCE tested to… • +50ºC (-65ºF)
TENSILE SET maximum… 10MPa  (1450psi)
COMPRESSION SET maximum… 25%
Complete specification data and testing methods are availiable upon request.
 
flashing calculatorTry our new Master Flash Roof Pitch Calculator which is designed specifically for Master Flash® products. Using this calculator in association with foreign or competitive products may result in installation failure. This Calculator is designed to provide assistance in planning only. It is to be used as a guide and not the ultimate source of information. Every effort has been made to make this as complete and accurate as possible. If you are installing on pitches greater than 10/12 or you desire further information, please call Aztec Washer: 1-800-WASHER-5.
 
Sizing Chart
Check diameter of pipe. Select the appropiate Master Flash® for pipe or duct diameter. For extreme pitch or surface irregularity select next larger size. Choose the compound required, then refer to the part number for the Master Flash® desired.

PIPE SIZE US PART NUM FLASHING DETAILS
Mini 1/8”– 3/4” ICC-SQ051 A-Top opening diameter Closed

(3 mm - 19 mm)
B-Cut to suit pipe size 1/8” – 3/4” (3-19mm)



C-Base dimensions 2 - 1/4” (57mm)





#1 1/4”- 2-3/4” ICC-SQ101B A-Top opening diameter Closed

(6 - 70mm)
B-Cut to suit pipe size 1/4” – 2-3/4” (6 - 70mm)



C-Base dimensions 4-1/2” (114mm)





#2 7/8”- 4” ICC-SQ201B A-Top opening diameter 7/8” (22mm)

(22 - 101mm)
B-Cut to suit pipe size 7/8” - 4” (22 - 101mm)



C-Base dimensions 6” (152mm)





#3 1/4” - 5-3/4” ICC-SQ301B A-Top opening diameter Closed

(6 - 146mm)
B-Cut to suit pipe size 1/4” – 5-3/4” (6 - 146mm)



C-Base dimensions 8” (203mm)





#4 2-3/4” - 7” ICC-SQ401B A-Top opening diameter 2-3/4” (70mm)

(70 - 177mm)
B-Cut to suit pipe size 2-3/4”– 7” (70 - 177mm)



C-Base dimensions 10” (254mm)





#5 4” - 8-1/4” ICC-SQ501B A-Top opening diameter 4” (101mm)

(101 - 209mm)
B-Cut to suit pipe size 4” – 8-1/4” (101 - 209mm)



C-Base dimensions 11” (279mm)





#6 4-3/4” - 10” ICC-SQ601B A-Top opening diameter 4-3/4” (121mm)

(121 - 254mm)
B-Cut to suit pipe size 4-3/4” – 10” (121 - 254mm)



C-Base dimensions 12” (304mm)





#7 5-1/2” - 11-1/2” ICC-SQ701B A-Top opening diameter 5-1/2” (140mm)

(140 - 292mm)
B-Cut to suit pipe size 5-1/2” – 11-1/2” (140 - 292mm)



C-Base dimensions 14” (355mm)





#8 6-3/4” - 13-1/2” ICC-SQ801B A-Top opening diameter 6-3/4” (171mm)

(171 - 343mm)
B-Cut to suit pipe size 6-3/4” – 13-1/2” (171 - 343mm)



C-Base dimensions 17” (431mm)





#9 9-1/2” - 20-1/2” 35W-SQ901B A-Top opening diameter 9-1/2” (241mm)

(241 - 520mm)
B-Cut to suit pipe size 9-1/2” – 20-1/2” (241 - 520mm)



C-Base dimensions 25” (635mm)





MAXI 12” - 28-1/2” 35W-SQ951B A-Top opening diameter 12” (304mm)

(305 - 724mm)
B-Cut to suit pipe size 12” - 28-1/2” (304 - 724mm)



C-Base dimensions 34” (863mm)
 
   
 
   
 
 
 
13821 Danielson St., Poway, California 92064 | 1-800-WASHER 5 (927-4375) | 1-858-513-4350 | Fax 1-858-513-4305

Master Flash®, Universal Master Flash®, Universal Retrofit Master Flash®, Retrofit Master Flash®, Residential Master Flash®,
Square Vent Retrofit Master Flash®, Master Seal® and Master Plug® are registered trademarks of Aztec Washer Company, Inc.
Please Note: Aztec Washer metal roof flashings and 35 year pipe flashing products are available online from trusted retailers.

©2009-2014 Aztec Washer Company, Inc. | Site Map | Privacy Statement