HOME | ABOUT US | CERTIFICATIONS | CATALOG | CONTACT US | REQUEST QUOTE
 
 
  Translate This Page 
 
Featured
 
 
 
 

Aztec Master Flash Pipe Flashing Video DemonstrationRetrofit Master Flash®

Retrofit Master Flash is designed to seal existing pipes/vents where a standard pull over flashing cannot be assembled. The split design allows for an easy wrap around installation. Snap rivets and cable tie included.

Installation EPDM Installation Silicone  

Check diameter of your pipe or duct and select appropriate Retrofit Master Flash® to accommodate your application as indicated on the chart below. For extreme pitch or surface irregularity, select next larger size. Simply split the flashing at the designated area and close with the rivets and zip ties as instructed on the installation instructions.

 

RETROFIT MASTER FLASH®

WEATHER RESISTANCE

Designed to withstand the damaging effects of ultraviolet light and ozone.

MODIFICATIONS MADE SIMPLE

Easy to see pipe diameters make for painless on site customization.

MALLEABLE BASE

Designed to conform to most panel configurations and roof pitchesregardless of pipe location.

EASILY INSTALLED FASTENER SNAPS INCLUDED

 
flashing calculatorTry our new Master Flash Roof Pitch Calculator which is designed specifically for Master Flash® products. Using this calculator in association with foreign or competitive products may result in installation failure. This Calculator is designed to provide assistance in planning only. It is to be used as a guide and not the ultimate source of information. Every effort has been made to make this as complete and accurate as possible. If you are installing on pitches greater than 10/12 or you desire further information, please call Aztec Washer: 1-800-WASHER-5.
 
Sizing Chart

PIPE SIZE US PART NUM FLASHING DETAILS
#1 1/2”-4” BLACK-RF101BP A-Top opening diameter Closed

12- 101mm GREY-RF101GP B-Cut to suit pipe size 1/2” – 4” (12-101mm)


SILICONE-RF102RS C-Base dimensions 8-3/16” (205mm)





#2 4” 9-1/4" BLACK-RF201BP A-Top opening diameter 4" (101mm)

101-135mm GREY-RF201GP B-Cut to suit pipe size 4” 9-1/4"(101-135mm)





#3 9-1/4”-16-1/4” BLACK-RF301BP A-Top opening diameter 9-1/4” (235mm)

235-412mm GREY-RF301GP B-Cut to suit pipe size 9-1/4"-16-1/4" (235-412mm)


SILICONE-RF302RS C-Base dimensions 21-1/2” (546mm)

Flashing Detail

   
 
   
 
 
 
13821 Danielson St., Poway, California 92064 | 1-800-WASHER 5 (927-4375) | 1-858-513-4350 | Fax 1-858-513-4305

Master Flash®, Universal Master Flash®, Universal Retrofit Master Flash®, Retrofit Master Flash®, Residential Master Flash®,
Square Vent Retrofit Master Flash®, Master Seal® and Master Plug® are registered trademarks of Aztec Washer Company, Inc.
Please Note: Aztec Washer metal roof vent flashings and square base retrofit pipe flashing products are available online
from trusted retailers.

©2009-2013 Aztec Washer Company, Inc. | Site Map | Privacy Statement
 
  More Managed Sales and Marketing Services by Perpetual Prospects Unlimited, LLC