HOME | ABOUT US | CERTIFICATIONS | CATALOG | CONTACT US | REQUEST QUOTE
Translate This Page
Featured
 
 
 

Solar Master Flash®

SOLAR MASTER FLASH®

WEATHER PROTECTION
Made of EPDM or Silicone, these flashings are compounded specifically for maximum resistance to weathering due to ozone and ultraviolet light.

EASY ON-SITE CUSTOMIZING
With a pre-cut hole for pipe sizes 3/4" to 1" inch allowing minimal on-site preperation and assembly

A "C-12 ASTM additional requirement was added to assure conformance to the most stringent ozone/weathering
specifications available.

BASE FLEXIBILITY
The base is designed to form a seal on most panel configurations and roof pitch regardless of pipe location.

The pitch canal allows for maximum flexibility, easily accommodating up to a 60 degree pitch without affecting the performance.

TWO COMPOUNDS
Availiable in two compounds to handle virtually all job applications
EPDM 500 SILICONE
ADVANCED OZONE RESISTANCE tested to... 70 hour @ 500 pphm 70 hour @ 500 pphm
HIGH TEMPERATURE RESISTANCE
tested to intermittent • +135ºC (+275ºF) • +260ºC (+500ºF)
continuous • +100ºC (+212ºF) • +225ºC (+437ºF)
LOW TEMPERATURE RESISTANCE tested to… • +50ºC (-65ºF) • -74ºC (-100ºF)
TENSILE SET maximum… 10MPa  (1450psi) 5 Mpa (700 psi)
COMPRESSION SET maximum… 25% 50%
Complete specification data and testing methods are availiable upon request
 
flashing calculatorTry our new Master Flash Roof Pitch Calculator which is designed specifically for Master Flash® products. Using this calculator in association with foreign or competitive products may result in installation failure. This Calculator is designed to provide assistance in planning only. It is to be used as a guide and not the ultimate source of information. Every effort has been made to make this as complete and accurate as possible. If you are installing on pitches greater than 10/12 or you desire further information, please call Aztec Washer: 1-800-WASHER-5.
         
Sizing Chart




PIPE SIZE US PART NUM FLASHING DETAILS
SOLAR FLASH 3/4" - 1" BLACK - SF101BA A-Top opening diameter .60" (15mm)

(19 - 25mm) SILICONE - SF102RA B-Overall Height 2-1/2” (63mm)



C-Base dimensions 4” (101mm)

Flashing Detail

 
   
 
   
13821 Danielson St., Poway, California 92064 | 1-800-WASHER 5 (927-4375) | 1-858-513-4350 | Fax 1-858-513-4305

Master Flash®, Universal Master Flash®, Universal Retrofit Master Flash®, Retrofit Master Flash®, Residential Master Flash®,
Square Vent Retrofit Master Flash®, Master Seal® and Master Plug® are registered trademarks of Aztec Washer Company, Inc.
Please Note: Aztec Washer metal roof flashings and solar flash pipe flashing products are available online from trusted retailers.

©2009-2014 Aztec Washer Company, Inc. | Site Map | Privacy Statement