HOME | ABOUT US | CERTIFICATIONS | CATALOG | CONTACT US | REQUEST QUOTE
 
 
  Translate This Page 
 
Featured
 
 
 
 

Universal Master Flash®

This universal flashing has been designed with sleeve flexibility to absorb vibration and pipe movement caused by expansion/contraction while sealing out unwanted elements. Easy on-site customization can accommodate virtually all installations.

AVAILABLE COLORS

Check diameter of your pipe or duct and select appropriate Universal Master Flash® to accommodate your application as indicated on the chart below. For extreme pitch or surface irregularity, select next larger size.

Installation EPDM Installation Silicone  


ALL AROUND PERFORMANCE

OZONE AND UV PROTECTION

Flashings are made of EPDM and Silicone, and are designed for maximum resistance to all weather conditions.

ON-SITE CUSTOMIZATION

Pipe diameters can be seen clearly for proper fitting.

ADAPTABLE BASE

The base is designed to mold to most panel configurationsand roof pitches regardless of pipe location.

ALL AROUND DESIGN EXCELLENCE

This universal flashing has been designed to fit virtually all panel configurations. Sleeve flexibility absorbs vibration and pipe movement caused by expansion/contraction. Easy on-site customization can accommodate all normal installations.

TWO COMPOUNDS / 9 SIZES 10 COLORS
Available in two compounds to handle virtually all job applications
EPDM SILICONE
ADVANCED OZONE RESISTANCE tested to... 70 hour @ 500 pphm 70 hour @ 500 pphm
HIGH TEMPERATURE RESISTANCE
tested to intermittent • +135ºC (+275ºF) • +260ºC (+500ºF)
continuous • +100ºC (+212ºF) • +225ºC (+437ºF)
LOW TEMPERATURE RESISTANCE tested to… • +50ºC (-65ºF) • -74ºC (-100ºF)
TENSILE SET maximum… 10MPa  (1450psi) 5 Mpa (700 psi)
COMPRESSION SET maximum… 25% 50%
Complete specification data and testing methods are availiable upon request
 
flashing calculatorTry our new Master Flash Roof Pitch Calculator which is designed specifically for Master Flash® products. Using this calculator in association with foreign or competitive products may result in installation failure. This Calculator is designed to provide assistance in planning only. It is to be used as a guide and not the ultimate source of information. Every effort has been made to make this as complete and accurate as possible. If you are installing on pitches greater than 10/12 or you desire further information, please call Aztec Washer: 1-800-WASHER-5.
 
Sizing Chart
Check diameter of your pipe or duct and select appropriate Universal Master Flash® to accommodate your application as indicated on the chart below. For extreme pitch or surface irregularity, select next larger size.

PIPE SIZE US PART NUM FLASHING DETAILS Closed
Mini 1/8"-3/4" Black EPDM-RD051BE A-Top opening diameter 1-1/2"
    Grey EPDM-RD051NG B-Overall Height 4"
    Grey Silicone-RD052GX C-Base dimensions  
         
#1 1/4”- 2-1/2” BLACK - RD101BE A-Top opening diameter Closed

6 - 63mm GREY - RD101GG B-Overall Height 3 -1/4" (82mm)


SILICONE - RD101RG C-Base dimensions 4 -3/4" (120mm)





#2 1-3/4”- 3” BLACK - RD201BE A-Top opening diameter 1 -1/4” (31mm)

44 - 76mm GREY - RD201GG B-Overall Height 4" (101mm)


SILICONE - RD201RG C-Base dimensions 6 -1/2" (165mm)





#3 1/4” - 5” BLACK - RD301BE A-Top opening diameter Closed

6 - 127mm GREY - RD301GG B-Overall Height 4" (101mm)


SILICONE - RD301RG C-Base dimensions 7 -3/4" (196mm)





#4 3” - 6-1/4” BLACK - RD401BE A-Top opening diameter 2 -1/4" (57mm)

76 - 158mm GREY - RD401GG B-Overall Height 4 -3/4" (120mm)


SILICONE - RD401RG C-Base dimensions 9 -1/4" (234mm)





#5 4-1/4” - 7-3/4” BLACK - RD501BE A-Top opening diameter 3 -1/2” (88mm)

107 - 196mm GREY - RD501GG B-Overall Height 4 -1/4" (107mm)


SILICONE - RD501RG C-Base dimensions 10 -1/2" (266mm)





#6 5” - 9” BLACK - RD601BE A-Top opening diameter 5" (127mm)

127 - 228mm GREY - RD601GG B-Overall Height 6" (152mm)


SILICONE - RD601RG C-Base dimensions 13" (330mm)





#7 6” - 11” BLACK - RD701BE A-Top opening diameter 5 -1/2" (139mm)

152 - 279mm GREY - RD701GG B-Overall Height 5 -1/2" (139mm)


SILICONE - RD701RG C-Base dimensions 14 -1/2" (368mm)





#8 7” - 13” BLACK - RD801BE A-Top opening diameter 6" (152mm)

177 - 330mm GREY - RD801GG B-Overall Height 6" (152mm)


SILICONE - RD801RG C-Base dimensions 16 -1/2" (412mm)





#9 9” - 19” BLACK - RD901BE A-Top opening diameter 7 -3/4" (196mm)

228 - 482mm GREY - RD901GG B-Overall Height 9" (228mm)


SILICONE - RD902RG C-Base dimensions 25-1/4" (641mm)

Flashing Detail

   
 
   
 
 
 
13821 Danielson St., Poway, California 92064 | 1-800-WASHER 5 (927-4375) | 1-858-513-4350 | Fax 1-858-513-4305

Master Flash®, Universal Master Flash®, Universal Retrofit Master Flash®, Retrofit Master Flash®, Residential Master Flash®,
Square Vent Retrofit Master Flash®, Master Seal® and Master Plug® are registered trademarks of Aztec Washer Company, Inc.
Please Note: Aztec Washer flashings for metal roofs and universal round base pipe flashing products are available online
from trusted retailers.

©2009-2014 Aztec Washer Company, Inc. | Site Map | Privacy Statement
 
  More Managed Sales and Marketing Services by Perpetual Prospects Unlimited, LLC